1250 Double Twist Buncher Bunching Machine

• Customization: Available
• Driven Type: Electric
• Condition: New
• Model NO.: HT. DMB1250.01
• Warranty: 12 Months
• Automatic Grade: Automatic
• Mould Life: 300,000-1,000,000 Shots
• Type: Double Stranding Machine
• Max. Speed: 800rpm
• Transport Package: Pallets
• Specification: 1250mm
• Trademark: JOC
• Origin: China
• HS Code: 84794000
• Production Capacity: 100 Stes

Product Description

1250 Double Twist Bunhcer


Product Overviews :
FRAME : It is processed by carbon steel by welding and heat treatment.
The shafts on both sides of the cradle are supported by bearings, Frame is fasten under the ground by expansion screws (HT Supply expansion screws.). Then adjust to the level by adjusting bolt.
Rotation shaft: Adopt to design of 2pcs bracket of steel structure to connect single bow, energy saving and low noise. Shafts are mounted into high precision bearings, which are grease lubricated through points joined outside, to allow lubrication even if machine is running, and are placed on cast iron removable housings.
The motion is transmitted to the shaft by a transversal transmission shaft via pulleys and toothed belts. Each shaft is complete with pulley (made of high resistance aluminium alloy), The grooves of the guide wheel are coated with ceramics(Sometimes adopt the whole ceramic zirconia pulley.)Pulleys rotate on high performance, grease lubricated bearings, are fitted on outer flanges, as protection against dynamic wind and are complete with pin made of titanium. AC MAIN MOTOR: connected through universal joint to the above transversal transmission shaft; then transmit to bow belt. Through AC45kw motor transmit to haul-off capstans. Adjust the rotate speed of main motor and the speed difference of haul-off capstans to reach the pitch size of stranding wire, complete realize the control and adjust of electronic pitch.

Technical Specification :
Mainly use for material: Bare copper wire, tin wire, silver wire.

Machine type	HT.DMB630.01	HT.DMB800.01	HT.DMB1000.01		HT.DMB1250.01
	HT.TMB630.01	HT.TMB800.01	HT.TMB1000.01		HT.TMB1250.01
Strand cross-section	0.15-6.00mm2	0.75-16.00mm2	1.5-25.00mm2		6.00-50.00mm2
Wire dia.	0.15-0.68mm	0.25-1.00mm	0.50-1.78mm			0.50-2.80mm
Pitch range	6.00-62.0mm	17.0-180.0mm	20.0-200.0mm			35.00-280.0mm
Machine speed	Max.3000RPM (6000Twist/min)	Max.2200RPM (4400Twist/min)	Max.1000RPM (2000Twist/min)			Max.800RPM (1600Twist/min)
Pitch change	Change pitch gears and electronic pitches
Bobbin size	500mm&630mm	630mm&800mm	630mm-1000mm	800mm-1250mm